TM-9-2320-209-20-3-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4
MAY 1981
TM-9-2320-209-20-3-2 - Page 422 of 552
TM 9-2320-209-20-3-2
CHAPTER 16
FRAME AND TOWING ATTACHMENTS
GROUP MAINTENANCE
Section I. SCOPE
16-1. EQUIPMENT ITEMS COVERED.
This chapter gives equipment maintenance
procedures for the pintle and towing attachments, spare wheel carrier, and fifth
wheel assembly for which there are authorized corrective maintenance tasks at the
organizational maintenance level.
16-2. EQUIPMENT ITEMS NOT COVERED.
All equipment items for which corrective
maintenance is authorized at the organizational maintenance level are covered in this
chapter.
Section II.
PINTLE AND TOWING ATTACHMENTS
16-3. FRONT LIFTING SHACKLE REMOVAL AND REPLACEMENT.
TOOLS:
3/4-inch wrench or 3/4-inch socket ratchet wrench (2)
15/16-inch wrench (2) or 15/16-inch socket ratchet wrench (2)
SUPPLIES: None
PERSONNEL: One
EQUIPMENT CONDITION: Truck parked, engine
a.
Preliminary Procedure. Remove brush guard
Refer to Part 1, para 6-4.
off, handbrake set.
from trucks without front winch.
16-1
Back to Top
