TM-9-2320-209-20-3-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4

MAY 1981

TM-9-2320-209-20-3-2 - Page 413 of 552

TM 9-2320-209-20-3- 2

FRAME 4

1 .

2 .

3 .

4 .

5 .

Lubricate drag link .

Refer to LO 9-2320-209-12/1 .

Using screwdriver bit , screw in and tighten adjusting plug (1). Unscre w

adjusting plug one half turn or less ,

until cotter pin slot lines up with holes .

Put cotter pin (2) through drag link (3) .

Using pliers, open ends of cotte r

pin .

Go to pitman arm (4) end of drag link (3) .

Do steps 2 and 3 again on that en d

of drag link .

Take safety jacks away .

Jack truck chassis down. Refer to Part 1, para 11-4 .

END OF TAS K

15-2 8