TM-9-2320-209-20-3-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4

MAY 1981

TM-9-2320-209-20-3-2 - Page 510 of 552

TM 9-2320-209-20-3-2

FRAME 2

1.

Put C-clamp (1) on spring (2).

Turn handle on C-clamp to squeeze spring

leaves together.

2.

Using 11/16-inch wrenches,

screw on and tighten screw (3) and nut (4).

Unscrew and take off C-clamp (1).

3.

Put four spacers (5) in four clips (6) and aline holes.

4.

Using 9/16-inch wrenches,

screw on and tighten four screws (7) and four

nuts (8) in four spacers (5) and four clips (6). Do not overtighten nuts

Clips should not bind spring (2).

5.

Using hammer, peen over ends of five screws (3 and 7).

NOTE

Follow-on Maintenance Action Required:

1. Replace rear leaf spring in truck. Refer to para

17-6.

2. Lower truck and take away jack. Refer to Part 1,

para 11-3.

END OF TASK

17-37