TM-9-2320-209-20-3-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4

MAY 1981

TM-9-2320-209-20-3-2 - Page 518 of 552

TM 9-2320-209-20-3-2

FRAME 5

1.

Put saddle (1) onto spring (2).

Make sure saddle is down on spring. Put

U-bolts (3) over saddle and down into spring seat (4).

2.

Put lockwashers (5) and screw nuts (6) onto U-bolts (3).

3.

Lower jacks (7) from spring (2) and take jacks away.

4.

Using torque wrench, tighten nuts (6) to 180 to 230 pound-feet.

NOTE

Follow-on Maintenance Action Required:

1. Replace rear wheels.

Refer to TM 9-2320-209-10.

2. Lower and take away jacks under cross shaft and

axle housing.

Refer to Part 1, para 11-3.

END OF TASK

17-45