TM-9-2320-209-20-3-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4

MAY 1981

TM-9-2320-209-20-3-2 - Page 517 of 552

TM 9-2320-209-20-3-2

FRAME 4

1.

2.

3.

4.

5.

Pack cover (1) with grease.

Grease both sides of gasket (2). Put gasket on

cover, lining up screw holes.

Put cover (1) with gasket (2) onto spring seat (3), lining up screw holes.

Put lockwashers (4) onto screws (5) and, using 1/2-inch wrench, screw in

and tighten six screws.

Using torque wrench, tighten screws (5) to 16 to 20 pound-feet.

Using rag, clean away any grease that squeezed out.

Jack spring (6) down until it just touches spring seat (3).

GO TO FRAME 5

17-44