TM-9-2320-209-20-3-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4
MAY 1981
TM-9-2320-209-20-3-2 - Page 81 of 552
TM 9-2320-209-20-3- 2
FRAME 6
1 .
Turn brake drum (1) until inspection hole (2) is at bottom of right brak e
lining .
2 .
Put 0.010-inch feeler gage in inspection hole (2) so it is between brak e
lining (3) and inside of brake drum (4) .
3 .
Using 1 1/8-inch box wrench, loosen and hold jamnut (5). Using 1/2-inc h
open end wrench, turn anchor pin (6) to left until feeler gage just goe s
in easily and can be pulled out with drag .
4 .
Using 1/2-inch open end wrench, hold anchor pin (6). Using 1 1/8-inc h
box wrench, tighten jamnut (5) .
GO TO FRAME 7
13-6 8
Back to Top
