TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 167 of 548

TM

9-2320-209-20-3-3

18-35. DELIVERY PUMP PROPELLER SHAFTS REMOVAL AND REPLACEMENT

(TRUCKS M49A1C AND M49A2C).

TOOLS:

9/16-inch wrench (2) 6-inch ruler

1/8-inch sockethead screw key 3/4-inch wrench (2)

(Allen wrench or equivalent) Brass or plastic head hammer

3/16-inch sockethead screw key Slip joint pliers

(Allen wrench or equivalent) Brass drift punch

SUPPLIES: None

PERSONNEL:

One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set, wheels

chocked.

a.

Removal.

FRAME 1

1.

Working under truck where front drive shaft (1) connects to intermediate

shaft (2) and using 3/16-inch allen wrench, loosen setscrew (3).

2.

Slide collar (4) to front of truck until it stops.

GO TO FRAME 2

18-152