TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 171 of 548

TM 9-2320-209-20-3-3

FRAME 5

1.

Working under truck at rear end of intermediate shaft (1) and using 3/16-inch

allen wrench, loosen setscrew (2).

2.

Using hammer, tap universal joint (3) until it comes off intermediate shaft (1).

3.

Pull rear shaft (4) from pump universal joint yoke (5) and take out rear

shaft.

4.

Slide collar (6) off rear shaft (4).

GO TO FRAME 6

18-156