TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 180 of 548

TM

9-2320-209-20-3-3

FRAME 6

1.

Pull collar (1) onto front driveshaft (2) with setscrew (3) lined up with wide

groove (4). Using 3/16-inch allen wrench,

tighten setscrew, then unscrew it

one turn.

2.

Look into universal joint ( 5).

Find place where wide groove fits. Line up wide

groove in front driveshaft (2) and put front driveshaft into universal joint.

3.

Put front drive shaft (2)

onto power

takeoff flange (6), lining up screw holes.

Put four screws (7) through screw holes and using 9/16-inch wrenches, screw

on and tighten four nuts (8) .

4.

Slide collar (1) so that it is about 1/8 inch away from universal joint (5).

Using 3/16-inch allen wrench, tighten setscrew ( 3).

GO TO FRAME 7

18-165