TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 184 of 548

TM

9-2320-209-20-3-3

FRAME 3

Soldier A 1. Hold yoke (1) on wood block.

NOTE

Drive pin punch must be a little smaller than end of

journal (2) so punch can go through bore of bearing.

Soldier B 2. Using hammer and drive pin punch, hammer end of journal (2)

down into yoke (1). Bearing (3) wil come out at bottom of yoke.

Soldier A 3. Turn yoke (1) over.

Soldier B 4. Do step 2 again for other bearing (3). When bearing falls out,

take spider (4) out of yoke (1) by letting one end down into

hole where bearing was. Take out other end first.

END OF TASK

18-169