TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 182 of 548

TM 9-2320-209-20-3- 3

18-36. PUMP DRIVE SHAFT BEARING AND JOURNAL UNIVERSAL REMOVAL AND

REPLACEMENT.

NOTE

All four pump drive shaft universals do not look

the same. Some yokes may not look like the

pictures. This task is still the same for all

pump drive shaft universals.

TOOLS: 5/16-inch deep well socket wrench

Retaining ring pliers

Drive pin punch

Hammer

Brass punch

SUPPLIES: Artillery and automotive grease, type GAA, MIL-G-10924

PERSONNEL: T

W O

EQUIPMENT CONDITION,

Truck parked, engine off, handbrake set.

a.

Preliminary Procedure. Remove drive shaft with universal to be worked

on. Refer to para 18-59.

b. Removal.

FRAME 1

1.

Using wrench,

unscrew and take off grease fitting (1).

2.

Using retaining ring pliers, take out four retaining rings (2).

GO TO FRAME 2

18-167