TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 178 of 548

TM

9-2320-209-20-3-3

FRAME 4

1.

Put collar (1) onto rear shaft (2) with setscrew (3) lined up with wide

groove (4) in rear shaft. Using 3/16-inch allen wrench, tighten setscrew,

then unscrew it one turn.

2.

Look into yoke from pump (5).

Find place where wide groove (4) fits.

Line up wide grooves and put rear shaft (2) into yoke from pump.

3.

Line up keyway in universal joint (6) with key (7) on intermediate shaft (8)

and slide universal joint all the way onto intermediate shaft.

4.

Using 3/16-inch allen wrench, tighten setscrew (9).

GO TO FRAME 5

18-163