TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 177 of 548

TM

9-2320-209-20-3-3

FRAME 3

1.

Working under truck, lay back end of intermediate shaft (1) on frame

crossmember (2).

2.

Put spacer (3) on front pillow block (4). Put pillow block in place on frame

crossmember (5), alining screw holes.

3.

Put two screws (6) through holes in frame crossmember (5).

4.

Using 3/4-inch wrenches, screw on and tighten two nuts (7).

5.

Do steps 2 through 4 again for other end of intermediate shaft (1).

6.

Move intermediate shaft (1) so same amount of shaft goes through each

pillow block (4).

7.

Using 1/8-inch allen wrench, tighten two setscrews (8).

GO TO FRAME 4

18-162