TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 175 of 548

TM 9-2320-209-20-3-3

b. Repair.

(1) Repair is limited to the removal and replacement of parts found damaged

during inspection.

(2) Refer to para 18-36 for removal and installation of bearing and journal

universal.

c. Replacement.

FRAME 1

1.

Using hammer, tap key (1) into pump shaft (2).

2.

Put universal joint (3) onto pump shaft (2), lining up keyway. Make sure

universal joint is on pump shaft all the way.

3.

Using 3/16-inch allen wrench, tighten setscrew (4).

4.

Point yoke (5) to front of truck with wide groove on bottom.

GO TO FRAME 2

18-160