TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 291 of 548

TM

9-2320-209-20-3-3

18-55. DISCHARGE VALVE CONTROL LEVERS REMOVAL AND REPLACEMENT

(TRUCKS M50A1, M50A2, AND M50A3).

TOOLS:

1/2-inch open end wrench

5/8-inch wrench

7/16-inch wrench (2)

Pliers

Leather gloves

SUPPLIES: None

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

WARNING

Always wear protective gloves when handling

cable.

Do not let cable slip through hands.

Rusty or broken wires can cause injury.

a.

Preliminary Procedure. Open rear compartment doors.

b. Removal.

FRAME 1

1.

Using 1/2-inch open end wrench, unscrew two nuts (1) until two cables (2)

are free.

2.

Pull two cables (2) out of two bolts (3).

GO TO FRAME 2

18-276