TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 361 of 548

TM 9-2320-209-20-3- 3

(2) Repair.

Check that all parts have no damage or wear. If part is

damaged, get a new one.

Check that rubber seal has no cuts, cracks or wear. If

seal is damaged, get a new one.

(3) Assembly.

FRAME 1

1.

Aline center holes in each half of yoke (1) with each side of hole in cover (2).

2.

Put in pin (3), five flat space washers (4), and two cotter pins (5). Using

pliers, bend open ends of cotter pins.

3.

Screw two eyebolts (6) partway into each side of nut (7).

4.

Put eyebolt (6) between holes in end of yoke (1) and slide through pin (8).

Put in two cotter pins (9). Using pliers, bend open ends of cotter pin.

END OF TASK

18-346