TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 366 of 548

TM

9-2320-209-20-3-3

f.

Replacement of Outer Manhole Cover.

FRAME 1

1.

2.

3.

4.

5.

6.

7.

NOTE

Be sure area around manhole opening is clean before

putting on cover (1).

Place outer manhole cover (1) with gasket (2) over manhole opening.

Swing yoke (3) down over cover (1).

Aline center holes in yoke (3) with hole in top of cover (1). Put two washers

(4) between hole in top of cover and one arm of yoke. Put three washers

between hole in top of cover and other arm of yoke.

Push in pin (5).

Put in cotter pin (6). Using pliers, bend open ends of cotter pin.

Lock handle (7) in hinge (8).

Put padlock (9) through hole in handle (7) and yoke (3). Lock padlock.

END OF TASK

18-351