TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 371 of 548

TM 9-2320-209-20-3-3

Spread clamp ring (1) and put it around manhole cover (2).

Put bolt (3) through two clamp ring brackets (4).

Put on washer (5) and screw on nut (6).

FRAME 3

1.

2.

3.

CAUTION

4.

5.

6.

END OF TASK

Do not overtighten nut (6) or clamp ring brackets

(4) may break. When tightening nut, using rubber

mallet, tap the other side of clamp ring (1) towards

clamp ring brackets.

Tighten bolt (3) and nut (6) a little at a time by hand, using mallet to tap

clamp ring.

Using 9/16-inch wrenches, tighten bolt (3) and nut (6).

Put padlock (7) through holes in clamp ring brackets (4) and lock it.

18-356