TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 378 of 548

TM

9-2320-209-20-3-3

18-66.

24-VOLT DOME LIGHT LAMP REMOVAL AND REPLACEMENT (TRUCKS

M109A2, M109A3, M185A2, AND M185A3).

TOOLS: Flat-tip screwdriver

SUPPLIES: None

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

b.

Preliminary Procedures.

(1) Turn off 24-volt dome light circuit breaker. Refer to TM 9-2320-209-10.

(2) Disconnect battery ground cable. Refer to Part 1, para 7-58.

Removal.

FRAME 1

1.

Using screwdriver,

unscrew and take out lockscrew (1) while holding light

door (2) up.

2.

Open light door (2) and let it hang open.

3.

Push lamp (3) in, turn it to left, and take out lamp.

END OF TASK

18-363