TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 382 of 548

TM 9-2320-209-20-3-3

18-68.

POWER SWITCH FUSE REMOVAL AND REPLACEMENT (TRUCKS M185A2

AND M185A3).

TOOLS: Fuse puller

SUPPLIES:

Cartridge fuses, 250-volt, 60-amp (2)

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedures.

(1) Unplug outside power plug from van receptacle. Refer to

TM 9-2320-209-10.

(2) Put ladder in place and open rear door. Refer to TM 9-2320-209-10.

b. Removal.

FRAME 1

1.

Working in van, pull handle (1) down to OFF position.

2.

Open door (2) by pulling out right side of door.

3.

Using fuse puller, take out two fuses (3).

END OF TASK

18-367