TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 384 of 548

TM 9-2320-209-20-3-3

18-69.

24-VOLT CIRCUIT BREAKER REMOVAL AND REPLACEMENT.

TOOLS:

11/32-inch wrench

Flat-tip screwdriver, 2-inch

SUPPLIES:

None

PERSONNEL:

One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedure. Disconnect battery ground cable. Refer to

Part 1, para 7-58.

b.

Removal.

FRAME 1

1.

Pull off two harness connectors (1 and 2) from circuit breaker (3).

2.

Using wrench and screwdriver,

unscrew and take off two screws (4) and

nuts (5) with washers (6). Take off circuit breaker (3).

END OF TASK

18-369