TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 374 of 548

TM

9-2320-209-20-3-3

18-65.

Section VIII.

SPECIAL PURPOSE BODIES

24-VOLT AND 115-VOLT DOME LIGHT ASSEMBLIES REMOVAL AND

REPLACEMENT (TRUCKS M109A2, M109A3, M185A2, AND M185A3).

NOTE

There are six 115-volt dome lights (three on

each side of ceiling).

There are two 24-volt

dome lights in center ceiling. This task is

the same for all dome light assemblies.

TOOLS: Flat-tip screwdriver

SUPPLIES:

Tags

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a. Preliminary Procedures.

(1) If working on 24-volt dome light assembly, disconnect battery

cable.

Refer to Part 1, para 7-58.

ground

(2) If working on 115-volt dome light assembly, turn off 115-volt circuit

breaker. Refer to TM 9-2320-209-10.

b. Removal.

FRAME 1

1.

Using screwdriver,

unscrew and take out lockscrew (1), while holding up light

door (2).

2.

Open light door (2) and let door hang open.

GO TO FRAME 2

18-359