TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 364 of 548

TM 9-2320-209-20-3-3

FRAME 2

NOTE

Cover (1) may need to be turned left or right before

lowering so that ends of yoke (2) clear pad eyes (4).

1.

Put on inner cover (1) so that end of yoke (2) with eyebolt (3) lines up

under upper pad eye (4).

2.

Place other end of yoke (2) in lower pad eye (4).

3.

Push in pin (5). Put in cotter pin (6). Using pliers, bend open ends of

cotter pin.

4.

Put end of eyebolt (3) in upper pad eye (4).

NOTE

Adjustment may be needed to push pin (7) through

holes in pad eye (4) and eyebolt (3). Turn eyebolt

nut (9) left or right as needed to line up holes.

5.

Put in pin (7). Put in cotter pin (8). Using pliers, bend open ends of

cotter pin.

GO TO FRAME 3

18-349