TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 373 of 548

TM 9-2320-209-20-3-3

b. Cleaning. Steam clean filler cover and dry with clean rags.

c.

Inspection and Repair. Check that filler cover and gasket have no

damage or wear.

I f part is damaged, get a new one.

a.

Replacement.

FRAME 1

1.

Place filler cover (1) and gasket (2) over opening for filler cover.

2.

Swing yoke (3) down over filler cover (1) .

3.

Aline center holes in yoke (3) with hole in top of filler cover (1) and push

pin (4) through holes.

NOTE

Some trucks have only one cotter pin (5).

4.

Put two cotter pins (5) into pin (4). Using pliers, bend open ends of cotter

pins.

5.

On trucks M50A1 and M50A2, lock handle (6) in hinge (7).

END OF TASK

18-358