TM-9-2320-209-20-3-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4
MAY 1981
TM-9-2320-209-20-3-3 - Page 40 of 548
TM
9-2320-209-20-3-3
1.
Put seat cushion (1) in position. Line up mounting holes in bracket (2) and
seat cushion.
2.
Put lockwashers (3) on four screws (4). Using screwdriver, screw in and
tighten screws.
NOTE
Follow-on Maintenance Action Required:
Replace driver’s seat in truck. Refer to para 18-8.
END OF TASK
18-25
Back to Top
