TM-9-2320-209-20-3-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4
MAY 1981
TM-9-2320-209-20-3-3 - Page 37 of 548
TM
9-2320-209-20-3-3
18-9.
FLOATING DRIVER’S SEAT REPAIR.
TOOLS:
Cross-tip screwdriver (Phillips type)
SUPPLIES: None
PERSONNEL: One
EQUIPMENT CONDITION:
Truck parked, engine off, handbrake set.
NOTE
Repair of driver’s seat is limited to removal and
replacement of back rest and seat cushions.
Preliminary Procedure. Remove driver’s seat from truck. Refer to
para 18-8.
a.
b.
Removal.
FRAME 1
1.
Using screwdriver, unscrew and take out four screws (1). Take off four
lockwashers (2).
2.
Take off seat cushion (3).
GO TO FRAME 2
18-22
Back to Top
