TM-9-2320-209-20-3-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4
MAY 1981
TM-9-2320-209-20-3-3 - Page 29 of 548
TM
9-2320-209-20-3-3
Section III.
WINDSHIELD ASSEMBLY
18-6. WINDSHIELD ASSEMBLY REMOVAL AND REPLACEMENT.
TOOLS:
Flat-tip screwdriver, heavy duty
3/8-inch wrench
SUPPLIES:
None
PERSONNEL:
One
EQUIPMENT CONDITION:
Truck parked, engine off, handbrake set.
a. Preliminary Procedure. Remove windshield wiper motors. Refer to Part 4,
para 21-4.
b.
Removal.
FRAME 1
1.
Working in cab, lift up windshield lock handle (1).
2.
Unscrew two windshield arm thumbscrews (2) partway.
3.
Open windshield (3) by pushing bottom toward front of truck.
4.
Tighten two windshield arm thumbscrews (2).
GO TO FRAME 2
18-14
Back to Top
