TM-9-2320-209-20-3-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4
MAY 1981
TM-9-2320-209-20-3-3 - Page 28 of 548
TM
9-2320-209-20-3-3
FRAME 2
I
1.
Put gear shift lever (1) over stub shaft (2).
2.
Put bolt (3) through split flange holes at bottom of gear shift lever (1).
3.
Using 5/8-inch and 11/16-inch wrenches,
screw on locknut and flat washer (4).
4.
Slide rubber boot (5) down over end of gear shift lever (1).
END OF TASK
18-13
Back to Top
