TM-9-2320-209-20-3-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4
MAY 1981
TM-9-2320-209-20-3-3 - Page 25 of 548
TM
9-2320-209-20-3-3
18-5. CAB TUNNEL REMOVAL AND REPLACEMENT.
TOOLS: 7/16-inch wrench
11/16-inch open end wrench
5/8-inch open end wrench
SUPPLIES: None
PERSONNEL: One
EQUIPMENT CONDITION:
Truck parked, engine off, handbrake set.
a. Removal (Front, Intermediate, and Rear Tunnels).
FRAME 1
1.
Slide rubber boot (1) up gear shift lever (2) as shown.
2.
Using 11/16-inch and 5/8-inch wrenches, unscrew nut with flat washer (3)
from bolt (4).
Take out bolt and lift off gear shift lever (2).
GO TO FRAME 2
18-10
Back to Top
