TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 494 of 548

TM 9-2320-209-20-3-3

c.

Repair. Check all parts. If parts are damaged, get new ones.

d. Replacement.

(1) Clamp.

1.

Hold eyebolt (1) in place and put pin (2) through clamp bracket (3) and

eyebolt (1).

2.

Hold clamp (4) in place and put pin (5) through

clamp (4) .

Use hammer to tap pins ( 2 and 5) in

3.

Put two cotter pins (6) through holes in pins (2

bend open end of cotter pins.

4.

Swing clamp (4) up so eyebolt (1) goes through

clamp bracket (3) and

place.

and 5) .

Using pliers,

hole in clamp.

5.

Put lockwashers (7) and flat washer (8) on eyebolt (1) and screw on

wing nut (9) two or three turns.

END OF TASK

18-479