TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 502 of 548

TM 9-2320-209-20-3-3

18-90. TOOLBOX REMOVAL AND REPLACEMENT (TRUCK M756A2).

TOOLS :

9/16-inch wrench (2)

¾-inch wrench (2)

½-inchwrench (2)

Wood block, 2x 4x 6inches (10)

Hydraulic jack, 12-ton capacity

SUPPLIES:

None

PERSONNEL: Two

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Removal.

FRAME 1

1.

Working on right side of truck, unlatch and open tool box door (1).

2.

Using ½-inch wrenches,

unscrew and take out two screws (2) and nuts (3).

3.

Using ½-inch wrenches,

unscrew and take out two screws (4) and nuts with

washers (5).

4.

Take off step plate (6).

GO TO FRAME 2

18-487