TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 525 of 548

TM 9-2320-209-20-3-3

FRAME 2

1.

2.

3.

4.

5.

Hold roller (1) in place, and put roller shaft (2) through holes in bracket (3)

and roller.

Put washer (4) on roller shaft.

Using 1 ½-inch wrenches, hold roller shaft (2) and screw on and tighten

nut (5). Aline a slot in nut with hole in roller shaft.

Put cotter pin (6) through slot in nut (5) and hole in roller shaft (2). Using

pliers, bend open ends of cotter pin.

Using 7/16-inch wrench, screw in and tighten grease fitting (7).

Do steps 1 through 4 again for roller (8).

NOTE

Follow-on Maintenance Action Required:

Lubricate roller assemblies.

Refer to LO 9-2320-209-12/1.

END OF TASK

18-510