TM 9-2320-209-20-3-3
c.
Repair. Check for damaged parts. If parts are damaged, get new ones.
d.
Replacement.
FRAME 1
1.
Working on left side of roller (1) , slide bearing seat (2) into roller and aline
holes.
2.
Using screwdriver, screw in and tighten four screws (3) .
3.
Slide bearing (4) and then oil seal (5) into bearing seat (2) .
4.
Do steps 1 through 3 again for right side of roller (1) .
GO TO FRAME 2
18-514