TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

  TM-9-2320-209-20-3-3 - Page 530 of 548

TM 9-2320-209-20-3-3
FRAME 2
Soldiers 1.
A and B
Soldier A 2.
Soldier B 3.
4.
5.
6.
7.
GO TO FRAME
NOTE
Make sure that oil seal and bearing stay in bearing seat.
Using hoist (1), lift up tailboard roller (2) and place it on two
auxiliary rollers (3) as shown.
Hold tailboard roller (2) in place.
Working on right side of tailboard roller (2) , slide shim (4)
on roller pin (5) and aline holes.
Push roller pin (5) into tailboard roller (2) and aline holes.
Using wrench, screw in and tighten four screws (6) with
lockwashers (7).
Do steps 3 through 5 again on left side of tailboard roller (2).
Take off rope (8) and hoist (1) .
3
18-515


Back to Top