TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 535 of 548

TM 9-2320-209-20-3-3

FRAME 2

1.

Put jack assembly in place on truck. Aline holes and put in pin (1).

2.

Using pliers, put in and bend open ends of cotter pin (2).

3.

Lift jack legs (3 and 4) up to level position and push them 1 foot into storage

compartment (5).

4.

Take safety pin (6) out of tee locking pin (7) and pull out tee locking pin.

5.

Push lower jack leg (3) into upper jack leg (4) and aline hole in upper jack

leg with last hole in lower jack leg.

6.

Put tee locking pin (7) through holes, but do not let tee locking pin stick out

other side of upper jack leg (4).

7.

Push jack legs (3 and 4) all the way into storage compartment (5).

8.

Turn tee locking pin (7) handle to up and down position and push it all the

way in.

9.

Put safety pin (6) through hole in end of tee locking pin (7). Lock safety pin.

END OF TASK

18-520