TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 190 of 410

TM 9-2320-209-20-3-4

(3) Data plates held with drive screws.

FRAME 1

1.

2.

3.

Using hammer and

plate (2) in place.

Using hammer and

chisel, cut off head of each drive screw (1) holding data

center punch, center punch each drive screw (1).

CAUTION

Before punching drive screw ends through an item, make

sure drive screws (1) go through to other side. Do not

punch screws held in deep solid block or hollow bottomless

assemblies. Damage to equipment could result.

Using 1/8-inch punch and hammer,

drive out rest of drive screws (1) and take

off data plate (2).

END OF TASK

21-27