TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 188 of 410

TM 9-2320-209-20-3-4

a.

Removal.

NOTE

Note which plates are taken

back in the same place.

(1) Riveted data plates.

off so they are put

FRAME 1

1.

2.

Using hammer and chisel,

cut heads off each rivet (1) holding data plate (2) in

place.

CAUTION

Before punching rivet ends through an item, make sure

rivets (1) go through to other side. Do not punch rivets

held in deep solid block or hollow bottomless assemblies.

Damage to equipment could result.

Using hammer and punch, tap out the rest of each rivet (1) and take off data

plate (2).

END OF TASK

21-25