TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 178 of 410

TM 9-2320-209-20-3-4

21-6. MIRROR AND BRACKET ASSEMBLY REMOVAL, REPAIR, AND REPLACEMENT.

NOTE

Procedure is the same for right mirror and

bracket assembly.

TOOLS :

9/16-inch open end wrench

7/16-inch open end wrench

7/8-inch open end wrench

1/2-inch socket wrench

SUPPLIES : None

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Removal.

FRAME 1

1.

Using 9/16-inch wrench,

unscrew nut (1) from bolt (2).

2.

Take out bolt (2), two lockwashers (3), and two flat washers (4).

3.

Do steps 1 and 2 again at lower end of bracket (5) and take off mirror and arm

assembly (6).

GO TO FRAME 2

21-15