TM 9-2320-209-20-3-4
FRAME 4
1.
2.
3.
Put two clamps (1) on steering column (2). Aline screw holes in plate (3) and
reservoir (4) with screw holes in two clamps (1) and put through three cap-
screws (5).
Using 7/16-inch wrenches,
hold three capscrews (5) and screw on and tighten
three washers (6) and nuts (7).
Put 39-inch hose (8) on cap (9) and put strainer (10) into hose. Put cap on
reservoir (4).
NOTE
Follow-on Maintenance Action Required:
Close hood and left side panel. Refer to TM 9-2320-209-10.
END OF TASK
21-14