TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 186 of 410

TM 9-2320-209-20-3-4

FRAME 5

1.

Using 7/8-inch wrench, loosen two adjustment nuts (1) on arms (2). Set arm

length for right mirror height and tighten nuts.

2.

Using 7/16-inch wrench, tighten two nuts (3).

3.

From driver’s position, swing mirror assembly toward front or rear of truck.

When rear view is right, tighten two nuts (4) using 9/16-inch wrench.

4.

Using 7/16-inch wrench, tighten mirror nut (5).

END OF TASK

21-23