TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 167 of 410

TM 9-2320-209-20-3-4

Section III.

CAB ACCESSORY ITEMS

21-4. WINDSHIELD WIPER MOTOR REMOVAL AND REPLACEMENT.

NOTE

This task is the same for both windshield

TOOLS : Cross-tip screwdriver (Phillips type)

Hose clamp pliers

3/8-inch open end wrench

SUPPLIES: None

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off,

a

.

Removal.

wiper motors.

handbrake set.

FRAME 1

1.

Unclip wiper blade (1) from wiper arm (2) and takeoff blade.

2.

Using 3/8-inch wrench, unscrew cap nut (3) and take off arm (2).

3.

Using phillips screwdriver, unscrew two screws (4) letting wiper motor (5)

hang on shaft (6).

GO TO FRAME 2

21-4