TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 166 of 410

TM 9-2320-209-20-3-4

WARNING

Dry cleaning solvent is flammable. Do not use

near an open flame. Keep a fire extinguisher

nearby when solvent is used. Use only in well–

ventilated places. Failure to do this may result

in injury to personnel and damage to equipment.

b. Cleaning. Using solvent, clean all metal parts.

c.

Inspection and Repair. Check all parts for damage. Throw away any bent,

broken or damaged parts.

Get new parts in their place.

d.

Assembly.

FRAME 1

1.

2.

3.

4.

5.

6.

7.

Push bow top (1) into bow corner (2) and aline holes.

Using screwdriver,

screw in and tighten two screws (3).

Push bow stake (4) into bow corner (2) and aline holes.

Using screwdriver, screw in and tighten two screws (5).

Put strap (6) against bow corner (2) as shown. Aline holes and hold it in

place.

Using screwdriver, screw in and tighten screw (7).

Do steps 1 through 6 again on other side of bow top (1).

END OF TASK

21-3