TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 156 of 410

TM 9-2320-209-20-3-4

19-27. POWER DIVIDER PROPELLER SHAFT ASSEMBLY REMOVAL AND REPLACE-

MENT (TRUCK M764).

TOOLS:

Prybar

9/16-inch wrench (2)

Torque wrench,

150 pound-feet capacity

SUPPLIES:

None

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Removal.

FRAME 1

1.

2.

3.

GO

Using 9/16-inch wrench, hold four cap screws (1).

Using 9/16-inch wrench, unscrew and take off four self-locking nuts and

lockwashers (2).

Take out four cap screws (1) holding flange yoke (3) to companion flange (4)

on power divider (5).

TO FRAME 2

19-143