TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 146 of 410

TM 9-2320-209-20-3-4

19-26.

POWER DIVIDER CONTROLS AND LINKAGE REMOVAL, REPLACEMENT, AND

ADJUSTMENT (TRUCK M764).

TOOLS:

Pliers

5/8-inch wrench

11/16-inch wrench

SUPPLIES: None

PERSONNEL: Two

EQUIPMENT CONDITION: Truck parked,

a. Preliminary Procedure. Remove front

18-5.

b. Removal.

FRAME 1

engine off, handbrake set.

and rear tunnel. Refer to Part 3, para

1.

Using pliers, pull out cotter pins (1) at both ends of control rod assembly (2).

2.

Take pins (3) out of clevis rod ends (4).

3.

Take control rod assembly (2) off of power divider control lever (5) and power

divider shifter shaft (6).

GO TO FRAME 2

19-133