TM-9-2320-209-20-3-4
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4
MAY 1981
TM-9-2320-209-20-3-4 - Page 150 of 410
TM 9-2320-209-20-3-4
FRAME 2
1.
Aline lower hole in power divider control lever (1) with hole in bracket (2).
2.
Put spacer (3) into hole in control lever (1).
3.
Put lockwasher (4) on screw (5) and put screw (5) through lower hole in
control lever (1) and bracket (2).
4.
Screw on nut (6).
5.
Using 5/8-inch wrench, hold screw (5) and using 11/16-inch wrench, tighten
nut (6).
GO TO FRAME 3
19-137
Back to Top
