TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 145 of 410

TM 9-2320-209-20-3-4

e.

Adjustment.

FRAME 1

1.

2.

3.

4.

5.

6.

7.

Using 3/4-inch wrench, loosen locknut (1).

Pull out poppet (2) on yoke end (3).

Take off yoke end (3) from shifter shaft (4).

Turn yoke end (3) in or out as necessary.

Pull poppet (2) out, aline yoke end (3) with shifter shaft (4), and let poppet

(2) go into hole in shifter shaft (4).

Tighten locknut (1).

Check shifting lever alinement. Refer to para 19-25d.

NOTE

Follow-on Maintenance Action Required:

Replace air hydraulic shield. Refer to Part 2, para 13-14.

END OF TASK

19-132