TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 142 of 410

TM 9-2320-209-20-3-4

Section III.

POWER TAKEOFF CONTROLS AND LINKAGE

19-25. TRANSMISSION POWER TAKEOFF SHIFT LINKAGE REMOVAL, REPLACEMENT,

CHECKOUT AND ADJUSTMENT.

TOOLS:

Pliers

5/8-inch wrench

3/4-inch wrench

SUPPLIES:

None

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a. Preliminary Procedure.

Remove air hydraulic shield. Refer to Part 2, para

13-14.

b. Removal.

FRAME 1

1.

Pull and turn poppet (1) on yoke end (2) of clevis (3).

2.

Take off yoke end (2) from transmission power takeoff shifter shaft (4).

3.

Using 5/8-inch wrench, unscrew and take out two screws and lockwashers (5),

holding power takeoff shifting lever support (6) to master cylinder (7).

4.

Take off transmission power takeoff shift linkage.

END OF TASK

19-129