TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 133 of 410

TM 9-2320-209-20-3-4

19-23. HYDRAULIC HOIST CONTROL LINKAGE REMOVAL, REPLACEMENT, AND

ADJUSTMENT (TRUCK M342A2).

TOOLS:

Pliers

9/16-inch wrench (2)

3/4-inch wrench

Adjustable wrench

SUPPLIES:

None

PERSONNEL: Two

EQUIPMENT CONDITION:

Truck parked, engine off,

a.

Removal.

handbrake set.

FRAME 1

1.

Working under truck and using pliers, take out and throw away cotter pin (1).

Take out clevis pin (2).

2.

Take clevis (3) off lever (4). Pull out rod assembly (5).

3.

Using pliers, take out cotter pin (6). Take out clevis pin (7).

4.

Take clevis (8) off lever (9).

GO TO FRAME 2

19-120