TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 130 of 410

TM 9-2320-209-20-3-4

c.

Replacement.

FRAME 1

NOTE

Bushings may be used instead of coupling nuts (1).

1.

Screw on and finger tighten four coupling nuts (1) onto four hydraulic line

hose nuts (2). If using bushings, finger tighten four hydraulic line hose nuts

into bushings.

NOTE

If using old hydraulic lines (3), tighten coupling nuts

(1) 1/8 turn.

If using new hydraulic lines, do not tighten coupling

nuts more than two turns.

2.

Using 1 3/8-inch wrenches,

hold four hose nuts (2) and tighten four coupling

nuts (1). If using bushings, using 1 3/8-inch wrenches, hold bushings and

tighten four hose nuts into bushings.

GO TO FRAME 2

19-117