TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 132 of 410

TM 9-2320-209-20-3-4

FRAME 3

1.

Refill hydraulic oil reservoir. Refer to LO 9-2320-209-12/1.

2.

Start engine. Refer to TM 9-2320-209-10.

3.

Put hoist control lever (1) in position D to raise dump body. Lower

safety braces. Refer to para 19-24.

4.

Raise and lower dump body several times. Refer to TM 9-2320-209-10.

5.

Check hydraulic lines for leaks.

If hydraulic lines leak, tighten coupling

nuts just enough to stop leaks. Refer to frames 1 and 2.

6.

Do steps 4 and 5 again. If hydraulic lines still leak, tell direct support

maintenance.

END OF TASK

19-119